Macbook pro 2011 hard drive cable replacement

Macbook pro 2011 hard drive cable replacement mac#

NOTE: If you want to make your life a little easier, you can buy a cable that has the IR sensor bracket already attached so you don't have to take the bracket off the old cable and put it on the new one. Just be careful to make sure that the one you buy is compatible with your model Macbook Pro.

The new replacement cable - These can be found all over the internet like this one on Amazon.

There are only a few items needed for the repair: As long as you have about 15 minutes and can work a screwdriver on small screws, you will have no problem.

This process doesn't require much time or previous technical knowledge. By following this guide, you will save yourself time and money because replacing this part yourself is cheaper and faster than paying and waiting for it to be done by Apple. This guide will take you through the simple steps in replacing your drive's SATA cable safely and easily. If you have already checked out the drive and made sure it is indeed still working, this process is the next thing you should do. That could mean a couple of things-either the drive is, in fact, failing or the computer just can't find the drive because there's a short in the drive's data cable. The question mark folder icon indicates that the computer can't locate the startup disk. Your drive may be just fine and instead it is your SATA cable connecting to the drive that is malfunctioning. Don't worry because that may not be the case.

Macbook pro 2011 hard drive cable replacement mac#

Did your Mac suddenly stop booting up? Are you getting a weird folder with a question mark icon on boot-up (as shown above) instead of the normal Apple logo? Your first thought might be that your hard drive/solid state drive has failed and you're panicking because you didn't back it up like you meant to.